GSO ISO 1770:1997
Gulf Standard
Current Edition
·
Approved on
15 October 1997
·
Solid-stem general purpose thermometers.
GSO ISO 1770:1997 Files
Arabic
12 Pages
Current Edition
74.86 USD
English
6 Pages
Current Edition
Reference Language
49.91 USD
GSO ISO 1770:1997 Scope
This standard specifies the requirements for two series of inexpensive “commercial quality” liquid-in-glass thermometers of the solid-stem type suitable for general purpose use in industry, schools and laboratories when great accuracy of measurement is not required:
a) a series designated A to H, in which nominal ranges and maximum overall length are specified but which may not be acceptable for testing by the authorized national verification laboratory;
b) A series designated J to W of greater accuracy than in a) and with specified ranges and a tolerance on overall length, which may be acceptable for testing by the authorized national verification laboratory.
The temperature range covered by each series is from – 100oC to +500oC.
Best Sellers From Metrology Sector
GSO OIML R87:2021
OIML R87:2016
Gulf Standard
Quantity of product in prepackages
GSO OIML R79:2021
OIML R79:2015
Gulf Standard
Labeling requirements for prepackages
GSO OIML R 76-1:2009
OIML R 76-1:2006
Gulf Standard
Non-automatic weighing instruments –
Part 1: Metrological and technical requirements - Tests
GSO OIML R111-1:2007
OIML R111-1:2004
Gulf Standard
Weights of classes E1, E2,F1,F2,M1,M1-2,M2,M2-3 and M3
Part 1: Metrological and Technical requirements
Recently Published from Metrology Sector
GSO ISO 12999-2:2024
ISO 12999-2:2020
Gulf Standard
Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 2: Sound absorption
GSO ISO 3864-2:2024
ISO 3864-2:2016
Gulf Standard
Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels
GSO ISO 12179:2024
ISO 12179:2021
Gulf Standard
Geometrical product specifications (GPS) — Surface texture: Profile method — Calibration of contact (stylus) instruments
GSO ISO 14405-2:2024
ISO 14405-2:2018
Gulf Standard
Geometrical product specifications (GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear or angular sizes