GSO ISO 13788:2014
Gulf Standard
Current Edition
·
Approved on
25 December 2014
·
Hygrothermal performance of building components and building elements -- Internal surface temperature to avoid critical surface humidity and interstitial condensation -- Calculation methods
GSO ISO 13788:2014 Files
English
40 Pages
Current Edition
Reference Language
205.57 USD
GSO ISO 13788:2014 Scope
This International Standard gives simplified calculation methods for:
a) The internal surface temperature of a building component or building element below which mould growth is likely, given the internal temperature and relative humidity. The method can also be used to assess the risk of other internal surface condensation problems.
b) The assessment of the risk of interstitial condensation due to water vapour diffusion. The method used does not take account of a number of important physical phenomena including:
— the variation of material properties with moisture content;
— capillary suction and liquid moisture transfer within materials;
— air movement from within the building into the component through gaps or within air spaces;
— the hygroscopic moisture capacity of materials.
Consequently, the method is applicable only where the effects of these phenomena can be considered to be negligible.
c) The time taken for water, from any source, in a layer between two high vapour resistance layers to dry out and the risk of interstitial condensation occurring elsewhere in the component during the drying process.
Best Sellers From Construction and Building Sector
GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
GSO 2084:2010
Gulf Standard
Design and application of speed control humps
GSO 440:2007
Gulf Standard
Calcium Silicate bricks
Recently Published from Construction and Building Sector
GSO ASTM C926:2024
ASTM C926:23a
Gulf Standard
Standard Specification for Application of Portland Cement-Based Plaster
GSO ASTM C1702:2024
ASTM C1702:23
Gulf Standard
Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
GSO ISO 12543-6:2024
ISO 12543-6:2021
Gulf Standard
Glass in building — Laminated glass and laminated safety glass — Part 6: Appearance
GSO EN 772-11:2024
EN 772-11:2011
Gulf Standard
Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units