GSO ASTM C1549:2022
Gulf Standard
Current Edition
·
Approved on
12 May 2022
·
Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
GSO ASTM C1549:2022 Files
No files are available for this standard right now!
GSO ASTM C1549:2022 Scope
1.1 This test method covers a technique for determining the
solar reflectance of flat opaque materials in a laboratory or in
the field using a commercial portable solar reflectometer. The
purpose of the test method is to provide solar reflectance data
required to evaluate temperatures and heat flows across surfaces exposed to solar radiation.
1.2 This test method does not supplant Test Method E903
which measures solar reflectance over the wavelength range
250 to 2500 nm using integrating spheres. The portable solar
reflectometer is calibrated using specimens of known solar
reflectance to determine solar reflectance from measurements
at four wavelengths in the solar spectrum: 380 nm, 500 nm,
650 nm, and 1220 nm. This technique is supported by
comparison of reflectometer measurements with measurements
obtained using Test Method E903. This test method is applicable to specimens of materials having both specular and
diffuse optical properties. It is particularly suited to the
measurement of the solar reflectance of opaque materials.
1.3 The values stated in SI units are to be regarded as
standard. No other units of measurement are included in this
standard.
1.4 This standard does not purport to address all of the
safety concerns, if any, associated with its use. It is the
responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Best Sellers From Construction and Building Sector
GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
GSO 2084:2010
Gulf Standard
Design and application of speed control humps
GSO 440:2007
Gulf Standard
Calcium Silicate bricks
Recently Published from Construction and Building Sector
GSO EN 933-4:2024
EN 933-4:2008
Gulf Standard
Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index
GSO ASTM F1861:2024
ASTM F1861:21
Gulf Standard
Standard Specification for Resilient Wall Base
GSO EN 196-3:2024
EN 196-3:2016
Gulf Standard
Methods of testing cement - Part 3: Determination of setting times and soundness
GSO EN 772-11:2024
EN 772-11:2011
Gulf Standard
Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units