GSO ASTM D5453:2024
Gulf Standard
Current Edition
·
Approved on
25 April 2024
·
Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
GSO ASTM D5453:2024 Files
No files are available for this standard right now!
GSO ASTM D5453:2024 Scope
1.1 This test method covers the determination of total sulfur
in liquid hydrocarbons, boiling in the range from approximately 25 °C to 400 °C, with viscosities between approximately 0.2 cSt and 20 cSt (mm2
/s) at room temperature.
1.2 Three separate interlaboratory studies (ILS) on
precision, and three other investigations that resulted in an
ASTM research report, have determined that this test method is
applicable to naphthas, distillates, engine oil, ethanol, Fatty
Acid Methyl Ester (FAME), and engine fuel such as gasoline,
oxygen enriched gasoline (ethanol blends, E-85, M-85, RFG),
diesel, biodiesel, diesel/biodiesel blends, and jet fuel. Samples
containing 1.0 mg ⁄kg to 8000 mg ⁄kg total sulfur can be analyzed (Note 1).
NOTE 1—Estimates of the pooled limit of quantification (PLOQ) for the
precision studies were calculated. Values ranged between less than
1.0 mg ⁄kg and less than 5.0 mg ⁄kg (see Section 9 and 16.1).
1.3 The values stated in SI units are to be regarded as
standard. No other units of measurement are included in this
standard.
1.4 This standard does not purport to address all of the
safety concerns, if any, associated with its use. It is the
responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
For warning statements, see 3.1, 7.3, 7.4, Section 8, and 9.1.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical
Barriers to Trade (TBT) Committee.
Best Sellers From Oil and Gas Sector
GSO 1180:2021
Gulf Standard
Automatic transmission fluid (ATF)
GSO 672:2010
Gulf Standard
Liquefied petroleum gases (LPG) for household use( mixture of commerical propane and butane).
GSO 1161:2021
Gulf Standard
HLP HYDRAULIC OILS
GSO 477:2011
Gulf Standard
Gulf Guide of Standard Specifications for Diesel(Gas Oil)
Recently Published from Oil and Gas Sector
GSO 1785-1:2024
Gulf Technical Regulation
Lubricating Oils for Internal Combustion Engines – Part 1: API Classifications of Lubricating Oils for Gasoline and Diesel Engines
GSO ASTM D6377:2024
ASTM D6377:20
Gulf Standard
Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCR<inf>x</inf > (Expansion Method)
GSO ISO 15663:2024
ISO 15663:2021
Gulf Standard
Petroleum, petrochemical and natural gas industries — Life cycle costing
GSO 2752:2024
Gulf Standard
REFRIGERATED BUTANE (LIQUEFIED PETROLEUM GAS)