ISO 3010:2017

مواصفة قياسية دولية   الإصدار الحالي
· اعتمدت بتاريخ ٣٠ مارس ٢٠١٧ ·

Bases for design of structures — Seismic actions on structures

الحماية ضد الزلازل والاهتزازات
* الاهتزازات وقياس الاهتزاز، انظر 17.160

ملفات الوثيقة ISO 3010:2017

الإنجليزية 60 صفحات
الإصدار الحالي
230.52 USD

مجال الوثيقة ISO 3010:2017

ISO 3010:2017 (including both the super structure and foundation) and other structures.

ISO 3010:2017 is not applicable to certain structures, such as bridges, dams, geotechnical works and tunnels, although some of the principles can be referred to for the seismic design of those structures.

ISO 3010:2017 is not applicable to nuclear power plants, since these are dealt with separately in other International Standards.

In regions where the seismic hazard is low, methods of design for structural integrity can be used in lieu of methods based on a consideration of seismic actions.

ISO 3010:2017 is not a legally binding and enforceable code. It can be viewed as a source document that is utilized in the development of codes of practice by the competent authority responsible for issuing structural design regulations.

NOTE 1 This document has been prepared mainly for new engineered structures. The principles are, however, applicable to developing appropriate prescriptive rules for non-engineered structures (see Annex N). The principles could also be applied to evaluating seismic actions on existing structures.

NOTE 2 Other structures include self-supporting structures other than buildings that carry gravity loads and are required to resist seismic actions. These structures include seismic force-resisting systems similar to those in buildings, such as a trussed tower or a pipe rack, or systems very different from those in buildings, such as a liquid storage tank or a chimney. Additional examples include structures found at chemical plants, mines, power plants, harbours, amusement parks and civil infrastructure facilities.

NOTE 3 The level of seismic hazard that would be considered low depends not only on the seismicity of the region but also on other factors, including types of construction, traditional practices, etc. Methods of design for structural integrity include nominal design horizontal forces (such as an equivalent static loading determined from a simplified equivalent static analysis) which provide a measure of protection against seismic actions.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
YSMO GSO 150-2:2020
GSO 150-2:2013 
لائحة فنية يمنية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
YSMO GSO 150-1:2020
GSO 150-1:2013 
لائحة فنية يمنية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية

اعتمدت مؤخراً

ISO 16521:2024
 
مواصفة قياسية دولية
Design of concrete-filled steel tubular (CFST) hybrid structures
ISO 24212:2024
 
مواصفة قياسية دولية
Remediation techniques applied at contaminated sites
ISO 830:2024
 
مواصفة قياسية دولية
Freight containers — Vocabulary
ISO 11671:2024
 
مواصفة قياسية دولية
Fibre reinforced plastics — Telescopic ladder — Requirements and test methods